Helical & Micropile Benefits
- Helical Piles can support immense loads with no foundation shifting or settling.
- Helical Piles are well-suited for building foundations in locales with unstable soils and rock surfaces.
- Helical Piles allow for construction in areas with limited access due to significant man-made or natural obstructions.
- Installation can performed so that facility operations can continue uninhibited.
- Use of helical piles in construction with underground utilities can mitigate the need to reroute these utilities.
Standard Operations
Helical anchors can be used in many different ways and consist of helical, load-bearing steel plates welded to an extendable steel shaft. The cross-section is usually either round or square/rectangular, and the load-bearing plates range in diameter from 6 up to 16 inches. Helical anchors are screwed into the ground using a hydraulic motor with rotary attachments varying in size to accommodate the equipment being used. As the helical anchor is getting screwed downward into the ground and reaches a certain depth, the load-bearing plates will have enough pull-out resistance to anchor into the earth. If further depth is needed, additional extensions can be added until desired depth has been reached.
Standard Operations
CIDH piles are typically used in the construction of bridge support structures, but, as a standard operation, they’re used in construction areas with unstable soil conditions that aren’t conducive to the operation of heavy pile-driving equipment; doing so could cause catastrophic earth-moving events. Results of the CIDH technique are powerfully-built cylindrical cement piles confined to the earth around it, with steel reinforcements.
Various Pile Types
Anchors are applied for tension solutions and piles are applied for compression solutions. The following are some of the various pile types:
Screw Anchors: Similar to helical anchors, screw anchors are also comprised of a steel shaft with steel plates. During installation, the amount of displaced soil is reduced.
Helical Piles: These are used typically in industrial and commercial repairs.
Helical Piers: These are used when both compression and tension forces are needed for stability.
Various Pile Types
Anchors are applied for tension solutions and piles are applied for compression solutions. The following are some of the various pile types:
Screw Anchors: Similar to helical anchors, screw anchors are also comprised of a steel shaft with steel plates. During installation, the amount of displaced soil is reduced.
Helical Piles: These are used typically in industrial and commercial repairs.
Helical Piers: These are used when both compression and tension forces are needed for stability.
Key Features and Benefits
- Easy installation and removal process
- Installation process is not impacted by adverse weather
- Minimal noise and vibration
- No wait time for the grout to cure
- Lightweight equipment
- Installation can be done in tight, restricted areas, and with small equipment
- Load-tested once installed
- Time and cost-effective
Key Features and Benefits
- Easy installation and removal process
- Installation or removal process is not impacted by adverse weather
- Minimal noise and vibration
- No wait time for the grout to cure
- Lightweight equipment
- Installation can be done in tight, restricted areas, and with small equipment
- Load-tested once installed
- Time and cost-effective
The Helical & Micropile Solution
When facing damage caused by shifting soils or changes in soil composition due to settling or fluctuations in moisture levels, helical anchors offer a robust solution for foundation repairs. The effectiveness of helical anchors stems from their ability to be strategically installed before pouring the foundation, catering to diverse needs across commercial, industrial, and residential construction projects. By integrating helical anchors proactively during the foundation construction phase, potential structural issues arising from soil movement can be preemptively addressed, ensuring long-term stability and durability of your building’s foundation.
The Helical & Micropile Solution
When facing damage caused by shifting soils or changes in soil composition due to settling or fluctuations in moisture levels, helical anchors offer a robust solution for foundation repairs. The effectiveness of helical anchors stems from their ability to be strategically installed before pouring the foundation, catering to diverse needs across commercial, industrial, and residential construction projects. By integrating helical anchors proactively during the foundation construction phase, potential structural issues arising from soil movement can be preemptively addressed, ensuring long-term stability and durability of your building’s foundation.
